R

Transform Your Machine - Call Now +44 (0) 118 940 1739

The tungsten are not only thicker but have a less sharp edge. Ideal for rocky conditions and machines over 50hp.

The plunger tooth was designed to fill the area of the wheel that has no cutting tips. When used with standard teeth it is possible to cut straight down into the stump without slewing.

This is particularly useful when cutting through surface roots that can the be pulled out, limiting damage to the surrounding area.

The narrow tooth was designed for smaller machines with a narrower cowl. The wheel is still 20mm thick and the tips are the same as standard.

The Keeper Cutter (P-00-202)

The keeper cutter is a keeper block with teeth on the side. This increase the depth of slew by 40mm. For those that like to slew slowly but deeper. Very useful for removing roots etc that you miss on the first pass. CLICK FOR MORE INFO.

Keeper Block (P-00-201)

The keeper block locks the tooth in place and re-enforces the tooth. If the whole assembly tightens into the wheel too far we can supply an oversize keeper block (P-00-201b) which will push the tooth out by an extra 5mm

Threaded Insert (P-00-207)

The threaded insert is basically a nut that holds itself in the wheel due to it’s shape. It can be replaced easily when worn.

Bolt (B-M10-65PP)

A simple M10 x 65mm 12.9 cap head bolt with  ‘PATLOC’ a patch of locking compound which stops the bolt from coming undone on its own. The bolt can be reused 4 times. It is important to check the tightness of bolts regularly and use a locking compound if comes loose  

MULTI-TIP makes stump grinder cutter wheels to fit Bandit, Camon, Carlton, CSF, Danequip, Dosko, Greenmech, Hemos, Hodges, Jaden, Jan Buggenhout Stubbenfräsen, JBM, Kandu, Kennards Redroo, Laski, Little David,  Morbark, OBMtec, Predator,  Ram, Rayco, Stumpman, Stumpmaster, Universal Bingham, Vermeer, Weber Stubbenfräsen , Weibang Stubbenfräsen and more.